Categories
| Categories | Fitting Mechanical PP Push |
| Brand | AMD |
| Model | Reducing Elbow |
| Standard | ISO 4427-3, EN 12201-3, BS 6920 |
| PN, SDR | (10,17), (12.5,13.6), (16,11), (20,9) |
| Material | Polypropylene |
| Warna | Hitam |
| Application | Water |
Spesifikasi Teknik
| Data Polymer | PE 100 | Unit | Metode Pengujian |
| Density at (23 °C) | 0.955 | g/cm³ | ISO 1183 |
| Viscosity Number | 360 | cm³/g | ISO 1628 |
| MFR (190°/5 Kg) | 0.22 | g/10dak. | ISO 1133 |
| MFR (190°/25 Kg) | 6.6 | g/10dak. | ISO 1133 |
| Mechanical Properties | |||
| Yield Stress | 23 | Mpa | ISO 527 |
| Bongation at yield | 9 | % | ISO 527 |
| Tensile Modulus | 900 | % | ISO 527 |
| Notched Impact Strenght | |||
| +23 °C | 26 | kJ/m² | ISO 179/1eA |
-23 °C | 13 | kJ/m² | ISO 179/1eA |
| Other | |||
| Oxidation - Induction time at (210 °C) | ≥ 20 | min | ISO TR 10837 |
| Carbon Black Content | 2.3±0.2 | % | ISO 6964 |
| Carbon Black Dispersion | ≤ 3 | ISO CD 11420 | |
| MRS Minimum Required Strength | < 10 | Mpa | ISO TR 9080 |
| Resistance to Slow Crack Propagation = 4.6 Mpa, 80 °C Notched | > 3000 | h | EN 33479 |
| Resistance to Rapid Crack Propagation = (S4 - Test 110/10mm) 0 °C | < 25 | Bar | ISO DIS 13477 |
| Elongation at break | < 600 | % | EN 638 |
| Linear Thermal Expansion | 1.8x10⁻⁴ | °C⁻¹ | ASTM D 696 (20 - 60 °C) |
| Spesific Heat Capacity | 1.9 | J/g°C | BPCL |
| Size | L | OD | ID | od | id |
| 25x20 | 64 | 39.5 | 25.5 | 33 | 20.5 |
| 32x20 | 80 | 48 | 32.8 | 33 | 20.5 |
| 32x25 | 80 | 48 | 32.8 | 39.5 | 25.5 |